View Full Version : 15" Kicker Comps,amp?
Rays523
02-28-06, 06:44 PM
I plan on installing 2 old kicker comps that used to be in my car back in the day :rolleyes: They are 8ohm impedance speakers and can each handle 1000watts of power. I plan on installing them underneath the stairs in my HT room, I'm basically planning on using a sheet of plywood and a few tubes of liquid nails to turn the empty space underneath the stairs and behind the closet into an enclosure for the subs.
Basically I need to find an amp for them for about $300$ and I was wondering how they would sound under the stairs.
My other components right now are 3 polk monitor 40s(left,right,center) and a Yamaha RXV-1500 reciever.
turboedsupe
02-28-06, 07:18 PM
I dont know about amps for home theatre but those speakers aren't handling no 1000 watts
rlj5242
03-01-06, 07:54 AM
The 1,000w rating is the max thermal rating. In a large sealed/IB alignment (what you are doing), the drivers will reach xmax well before they reach their thermal limit. What are the T/S parameters for these subs? Someone can model this if you can provide the parameters and an approximate size of your enclosure.
-Robert
i have some of them :) but thats dynamic power not rms
Rays523
03-05-06, 08:54 PM
yet-and, given their heritage, that says a lot.
KICKER Competition Specifications (C-series)
Model Size (in.) Impedance (ohms) Maximum Amplifier Power (watts) Sensitivity (dB 1w/1m) Frequency Response Mounting Depth (in., mm) Mounting Hole Diameter (in., mm) Recommended Sealed Enclosure Volume (cu. ft., liters)
C15c 15 4, 8 500 90.5 25-500 6-5/8, 168 14, 356 2.4-3.6, 67.9-101.9
rlj5242
03-06-06, 08:42 AM
You just posted the features and the recommended car enclosure. Those are not the Theile/Small parameters. Find us the parameters that look like this (http://editweb.iglou.com/eminence/eminence/pages/params02/params.htm).
-Robert
joebangaa
03-08-06, 03:46 AM
email tracy at kicker
vBulletin v3.0.6, Copyright ©2000-2010, Jelsoft Enterprises Ltd.